Pizza making forums etc, as they say "Dedicated to the Art and Science of Pizza Making!"
www.pizzamaking.com
Friday, November 6, 2009
Tuesday, May 19, 2009
Rising Idle
Occasionally idle will rise, sitting at a stop light for example. This page CIS idle rising w/eng temp??? has info, could be the retard not working correctly.
And this rising idle with time has some more ideas.
And this rising idle with time has some more ideas.
Tach Stopped working for a bit today
Starting the car to leave work this after noon and the tach was not moving. After less than 1/2 a mile it started working, normal I guess. This link Tach stopped - advice has some info on a similar problem and checking at the tach.
Thursday, May 7, 2009
Windshield washer info.
Trying to get the windshield washer to work, the blades will move but no water. Don't hear the pump.
Here is one link with info windshield washers no work
Here is one link with info windshield washers no work
Sunday, May 3, 2009
Distributor rotor mod for MSD
This link MSD Rotor Mod has info on a modification to the rotor that "might" be necessary when running the MDS 6AL. Also has some other rotors that might work with the sc.
Friday, February 20, 2009
Info on high idle
Found this post High Idle When Engine Warm mentions checking the decel valve. Now to find that and check, turning down the idle worked but will it start when cold?
And look at this one High Idle CIS issue has more info regarding the decel valve.
And look at this one High Idle CIS issue has more info regarding the decel valve.
Finally got the car running correctly 2/16/2009
Finally solved the stumbling problem. Turned out I had a couple of wires crossed. The purple and green wires that come from the MSD that connect to the "green" wire to the distributor were switched. At the moment don't even know how there are set now :) but I switched the way there were and presto it ran great.
But now, 2/20/2009 I suddenly get a high idle about 2000rpm once the car starts up.
But now, 2/20/2009 I suddenly get a high idle about 2000rpm once the car starts up.
Wednesday, January 21, 2009
Oxygen sensor related
Some posts related to oxygen sensor, testing etc.
CIS basic mixture adjustment info on voltage and mixture, not sure how accurate this is.
Mixture adjustment confirmation checking the mixture by testing the oxygen sensor at the test port.
911SC Oxygen Sensor more on testing.
and another O2 Sensor functioning
An explanation of the working of the O2 sensor, frequency valve etc CIS Experts, Advice Needed a nice detailed explanation.
More details Oxygen Sensor Voltage on what the voltages might mean.
CIS basic mixture adjustment info on voltage and mixture, not sure how accurate this is.
Mixture adjustment confirmation checking the mixture by testing the oxygen sensor at the test port.
911SC Oxygen Sensor more on testing.
and another O2 Sensor functioning
An explanation of the working of the O2 sensor, frequency valve etc CIS Experts, Advice Needed a nice detailed explanation.
More details Oxygen Sensor Voltage on what the voltages might mean.
Thursday, January 15, 2009
Subscribe to:
Posts (Atom)